Due to the COVID 19 epidemic, orders may be processed with a slight delay

Search

Need help? +91-8287980891
Need help? +91-8287980891

In Stock

Digital Gas Alarm-Alert Series (Master Alarm)

  • 16 Bit Microcontroller and Adequate Static RAM and Flash Memory.
  • Real Time Clock.
  • 10 BaseT Ethernet Interface for Connecting with the Hospital LAN.
  • RS-485 Port us to interface with RS-484 Ports.
  • I-Built GSM Modern for connectivity with the GSM Network. User needs to Provides a SIM with active telephone number and adequate balance. Post connection is preferred.
  • 2×16 Character LCD and 6 soft keys for System Configuration.
  • ABS Enclosure Dimansions 192x96x50mm.
  • External Power Adapter for 220VAC.

  • Supports up to 32 Moble Numbers.
  • User can select the massage text asa well as events on which a message is to be sent./li>
  • Diffrent Massages can be assigned to diffrent mobile numbers.
  • Complete Status can be sent to selected mobiles at predefined time.
  • Last 1000 Events are Logged with date and time information.
  • Alarm Status can be monitored on one or more PCs in the hospital connected over LAN.
  • Protocols Supprted: UDP, TCP/IP, ICMP, ARP.

The Gas Alarm are provided with an infrared port. A normal infrared Remote is used for calibration and adjusting the limits of the Gas Alarm.

This is a small unit which replaces the alarm extention port inside the Alarm System (2-8Gas Alarms) to enable LAN connectivity. UDP, ICMP, ARP and Mod-bus over UDP are the protocol supported by this tiny interface.

Purpose :

Hospital Alarm System with GSM cell phone network.

User Configured massages can be sent to up to 32 Mobiles.

Bestsellers

Automatic Changeover (Oxy/N2o/Co2)

(0 Reviews)
  • A-bank in use.
  • B- bank ready for use.
  • Control panel has in built LED display to indicate normal, low for line pressure.

Medical Oxygen (MOX) Regulator

(0 Reviews)
We are offering superior quality range of Mox Regulator to our esteemed customers. The range of products offered by Known manufacturers and designed in compliance with the international set standards and norms. These regulators are made available to the customers in varied specifications to meet variegated requirements of the customers. Mox Regulator is manufactured using high grade of brass, stainless steel and rubber procured from some of the trusted and certified vendors of the market.
  • For medical oxygen only
  • Single/Double stage
  • Inlet Pressure: Cylinder pressure up to 250 kg/cm square
  • Output: Preset type (factory set) for 4.0 to 4.5 kg/cm square.
  • ISI Marked.
  • Material: Brass forged
  • Finish: Plating
  • Easy to use in Medical B/D Type Cylinder.
  • Temper resistance design.

Automatic Changeover (Oxy/N2o/Co2)

(0 Reviews)
Features :
  • A-bank in use.
  • B- bank ready for use.
  • Control panel has in built LED display to indicate normal, low for line pressure.
  • The control panel include pressure gauge (63mm) to indicate the gas pressure of each header and pipe line distribution
  • pressure.
  • Capable to provide a distribution flow rate in excess of 2700 Lpm.
  • The control panel incorporate safety puncture in case of excess pressure i.e 100Psi.

Ward Vacuum Unit

(0 Reviews)
Ward Vacuum Units are supplied with compatible probe / connectors to match various standard Outlets. Variants of suction devices i.e. Pediatric and Adult are manufactured for various procedures like Tracheal Suction, Surgical Suction, Gastrointestinal Suction, Wound drainage, Nasal-gastric drainage, Sump drainage etc through direct mount. These products have the capacity of 600/1000/2000 ml. Features :
  • Regulator body, which houses an on/off switch, regulation knob, vacuum gauge graduated in mbar.
  • The on/off switch allows the operator to start or stop suction by turning the switch.
  • With regulation knob operation, knob operator can set the necessary vacuum amount.
  • The jar is made of polycarbonate transparent and unbreakable autoclave at 130°.
  • Well proven fluid control trap (safety) fitted on the unit automatically and efficiently shut off vacuum fully, while preventing the transfer of liquid to the vacuum regulator, pipeline and pump.

Semi Automatic Changeover (Oxy/N2o/Co2)

(0 Reviews)
Semi-Automated Control Panel System contains analog pressure meter for displaying pressure of each incoming bank and mainline gas pressure, As soon as the gas in one bank runs below set pressure, it sounds an alarm and switches to the other bank We offer our semi automatic gas control panels. These equipments are used for checking the gas level. Our products are known for their ability to yield accurate results.

Arm Movable Pendant

(0 Reviews)
Features : Movable Pendant Single arm is having the operational movement of only horizontal way comprising with 1000mm long arm having weight carrying capacity of more than 80Kg, 8no's electrical sockets 5/15 ampere, one monitor shelf and 6 nos. of gas outlets.

Back to Top
Product has been added to your cart